In-vitro and in-silico investigations of SLC-0111 hydrazinyl analogs as human carbonic anhydrase I, II, IX, and XII inhibitors.

Two novel series of hydrazinyl-based benzenesulfonamides 9a-j and 10a-j were designed and synthesized using SLC-0111 as the lead molecule. The newly synthesized compounds were evaluated for their inhibitory activity against four different human carbonic anhydrase (hCA) isoforms I, II, IX, and XII. Both the series reported here were practically inactive against the off-target isozyme hCA I. Notably, derivative 10a exhibited superior potency (Ki of 10.2 nM) than acetazolamide (AAZ) against the cytosolic isoform hCA II. The hCA IX and XII isoforms implicated in tumor progression were effectively inhibited with Kis in the low nanomolar range of 20.5-176.6 nM and 6.0-127.5 nM, respectively. Compound 9g emerged as the most potent and selective hCA IX and XII inhibitor with Ki of 20.5 nM and SI of 200.1, and Ki of 6.0 nM and SI of 683.7, respectively, over hCA I. Furthermore, six compounds (9a, 9h, 10a, 10g, 10i, and 10j) exhibited significant inhibition toward hCA IX (Kis = 27.0, 41.1, 27.4, 25.9, 40.7, and 30.8 nM) relative to AAZ and SLC-0111 (Kis = 25.0 and 45.0 nM, respectively). These findings underscore the potential of these derivatives as potent and selective inhibitors of hCA IX and XII over the off-target hCA I and II.

Novel 1,2,4-triazoles as selective carbonic anhydrase inhibitors showing ancillary anticathepsin B activity.

Background: Exploration of the multi-target approach considering both human carbonic anhydrase (hCA) IX and XII and cathepsin B is a promising strategy to target cancer. Methodology & Results: 22 novel 1,2,4-triazole derivatives were synthesized and evaluated for their inhibition efficacy against hCA I, II, IX, XII isoforms and cathepsin B. The compounds demonstrated effective inhibition against hCA IX and/or XII isoforms with considerable selectivity over off-target hCA I/II. All compounds presented significant anticathepsin B activities at a low concentration of 10-7 M and in vitro results were also supported by the molecular modeling studies. Conclusion: Insights of present study can be utilized in the rational design of effective and selective hCA IX and XII inhibitors capable of inhibiting cathepsin B.

Schiff baseAlkyne precursor for1,2,3-Triazole functionalized organosiliconas a PotentialSensor for Zn(II)andAntioxidantActivity.

Schiff base linked1,2,3-triazole silane5has been synthesized through the Schiff base terminated alkyne with azido via click chemistry,the compound4 structure elucidated through X-ray crystallography, and the compound5 is well characterized through different techniques such asFT-IR, 1H and 13C NMR and Mass spectrometry. UV-visible sensing studies of synthesized compounds4 and5 have been performed, and both are efficient in detectingZn(II) ion, but compound 5 has imparted a higher mode of attraction to Zn(II) with limit of detection (LOD) value (1.4 x 10-6M) wherethe compound 4 is calculated to be (1.25 x 10-5M). By Job's method, the stoichiometric ratio of compound5 and Zn(II) iscalculated to bea 1:1 ratio. The complex of compound 5 with Zn(II) was prepared. A radical and oxidative species are responsible for the deteriorating of stabilized molecules. The synthesized compound 5hasantioxidant propertiesthat can potentially scavenge 2,2-diphenyl-1-picrylhydrazyl (DPPH) radicals. Further to verify the mode of binding interaction between compound 5andZn(II), computational Density functional theory (DFT) study was evaluated.

Naphthaldehyde-Based Schiff Base Chemosensor for the Dual Sensing of Cu2+ and Ni2+ Ions.

In this study, a simple Schiff base sensor 1-(((4-nitrophenyl)imino)methyl)naphthalen-2-ol(NNM) has been used for chemosensing of metal ions. The metal sensing properties of sensor NNM have been investigated using UV-visible and fluorescence spectroscopic approaches. The spectral investigations revealed a red shift in absorption spectra and quenching in the emission band of the ligand molecule in the presence of Cu2+ and Ni2+ ions. The binding stoichiometry of sensor NNM for the analyte (Cu2+ and Ni2+ ions) has been investigated by the Job's plot analysis and found to be 1:1 (NNM:Analyte). The data of the Benesi-Hildebrand plot demonstrated that NNM detected Cu2+ and Ni2+ ions in nanomolar quantity. The binding insights among NNM and analytes (Cu2+ and Ni2+ ions) have been confirmed by shifted IR signals. Moreover, the reusabilty of the sensor has been investigated using an EDTA solution. In addition, the sensor NNM also successfully applied to real water samples for the identification and measurement of Cu2+ and Ni2+ ions. Hence, this system could be highly applicable in environmental and biological applications.

Illuminating Bacterial Contamination in Water Sources: The Power of Fluorescence-Based Methods.

Bacterial contamination of water sources is a significant public health concern, and therefore, it is important to have accurate and efficient methods for monitoring bacterial concentration in water samples. Fluorescence-based methods, such as SYTO 9 and PI staining, have emerged as a promising approach for real-time bacterial quantification. In this review, we discuss the advantages of fluorescence-based methods over other bacterial quantification methods, including the plate count method and the most probable number (MPN) method. We also examine the utility of fluorescence arrays and linear regression models in improving the accuracy and reliability of fluorescence-based methods. Overall, fluorescence-based methods offer a faster, more sensitive, and more specific option for real-time bacterial quantification in water samples.

COVID-19 Virus Structural Details: Optical and Electrochemical Detection.

The increasing viral species have ruined people's health and the world's economy. Therefore, it is urgent to design bio-responsive materials to provide a vast platform for detecting a different family's passive or active virus. One can design a reactive functional unit for that moiety based on the particular bio-active moieties in viruses. Nanomaterials as optical and electrochemical biosensors have enabled better tools and devices to develop rapid virus detection. Various material science platforms are available for real-time monitoring and detecting COVID-19 and other viral loads. In this review, we discuss the recent advances of nanomaterials in developing the tools for optical and electrochemical sensing COVID-19. In addition, nanomaterials used to detect other human viruses have been studied, providing insights for developing COVID-19 sensing materials. The basic strategies for nanomaterials develop as virus sensors, fabrications, and detection performances are studied. Moreover, the new methods to enhance the virus sensing properties are discussed to provide a gateway for virus detection in variant forms. The study will provide systematic information and working of virus sensors. In addition, the deep discussion of structural properties and signal changes will offer a new gate for researchers to develop new virus sensors for clinical applications.

Propyl-phthalimide Cyclotricatechylene-Based Chemosensor for Sulfosulfuron Detection: Hybrid Computational and Experimental Approach.

The detection of trace amounts of sulfosulfuron, a pesticide of increasing importance, has become a pressing issue, prompting the development of effective chemosensors. In this study, we functionalized cyclotricatechylene (CTC) with propyl-phthalimide due to the presence of electronegative oxygen and nitrogen binding sites. Our optimized ligand displayed the highest docking score with sulfosulfuron, and experimental studies confirmed a significant fluorescence enhancement upon its interaction with sulfosulfuron. To gain a deeper understanding of the binding mechanism, we introduced density functional theory (DFT) studies. We carried out binding constant, Job's plot, and limit of detection (LOD) calculations to establish the effectiveness of our chemosensor as a selective detector for sulfosulfuron. These findings demonstrate the potential of our chemosensor for future applications in the field of pesticide detection.

Membraneless Hydrogen Peroxide Fuel Cells as a Promising Clean Energy Source.

In an in-depth investigation of membraneless hydrogen peroxide-based fuel cells (H2O2 FCs), hydrogen peroxide (H2O2), a carbon-neutral compound, is demonstrated to undergo electrochemical decomposition to produce H2O, O2, and electrical energy. The unique redox properties of H2O2 position it as a viable candidate for sustainable energy applications. The proposed membraneless design addresses the limitations of conventional fuel cells, including fabrication complexities and design challenges. A novel three-dimensional electrode, synthesized via electroplating techniques, is introduced. Constructed from Au-electroplated carbon fiber cloth combined with Ni-foam, this electrode showcases enhanced electrochemical reaction kinetics, leading to an increased power density for H2O2 FCs. The performance of fuel cells is intricately linked to the pH levels of the electrolyte solution. Beyond FC applications, such electrodes hold potential in portable energy systems and as high surface area catalysts. This study emphasizes the significance of electrode engineering in optimizing the potential of H2O2 as an environmentally friendly energy source.

Bridging the gap: harnessing liquid nanomachine know-how for tackling harmful airborne particulates.

The emergence of "nanomotors", "nanomachines", and "nanorobotics" has transformed dynamic nanoparticle research, driving a transition from passive to active and intelligent nanoscale systems. This review examines two critical fields: the investigation of airborne particles, significant contributors to air pollution, and the rapidly emerging domain of catalytic and field-controlled nano- and micromotors. We examine the basic concepts of nano- and micromachines in motion and envision their possible use in a gaseous medium to trap and neutralize hazardous particulates. While past studies described the application of nanotechnology and nanomotors in various scenarios, airborne nano/micromachine motion and their control have yet to be thoroughly explored. This review intends to promote multidisciplinary research on nanomachines' propulsion and task-oriented applications, highlighting their relevance in obtaining a cleaner atmospheric environment, a critical component to consider for human health.

Extractive Spectrophotometric Detection of Sn(II) Using 6-bromo-3-hydroxy-2-(5-methylfuran-2-yl)-4H-chromen-4-one.

For the determination of tin(II) traces, an extractive spectrophotometric approach is devised. The applied method serves a powerful tool for determination of tin(II), involves the formation of yellow colored complex after the binding of 6-bromo-3-hydroxy-2-(5-methylfuran-2-yl)-4H-chromen-4-one (BHMF) and tin(II) in 1:2 stiochiometry in a slightly acidic medium (HCl). The complex shows absorbance at 434 nm with respect of the blank reagent. The outcomes of spectral investigation for complexation showed a Beer's range of 0-1.3 µg Sn mL-1, molar absorptivity, specific absorptivity and Sandell's complex sensitivity are 9.291 × 104 L mol-1 cm-1, 0.490 mL g-1 cm-1 and 0.002040 µg cm-2 at 434 nm that was stable for two days. The interferences study results showed that this method is free from interferences, when tested with metal ions including Ag, Be, Bi, Ca, Cd, Ce, Co, Hg, Mo, Re, Pt, Se,Ti, U, V, W and other common cations, anions, and complexing agents. The applied method is quite simple, highly selective, and sensitive with good re-producibility. This method has been satisfactorily by utilizing the proposed procedure, and its applicability has been tested by analyzing synthetic samples and an alloy sample of gunmetal. The procedure assumes this because of the scarcity of better methods for determining tin(II). The results are in good agreement with the certified value.

Designing of efficient two-armed colorimetric and fluorescent indole appended organosilicon sensors for the detection of Al(III) ions: Implication as paper-based sensor.

Metal ions have significant roles in diagnosis, industry, human health, and the environment. To design and develop new lucid molecular receptors for the selective detection of metal ions is important for environmental and medical applications. In the present work, two-armed indole appended Schiff bases conjoined with 1,2,3-Triazole bis-organosilane and bis-organosilatrane skelton sensors for naked eye colorimetric and fluorescent detection sensors for Al(III) are developed. The introduction of Al(III) in sensor 4 and 5 show red shift in UV-visible spectra, changes in fluorescence spectra and immediate color change from colorless to dark yellow. Furthermore, the pH and time response studies were explored for both sensors 4 & 5. The sensors 4 and 5 exhibited significantly low detection limit (LOD) in nano-molar range 1.41 × 10-9 M and 0.17 × 10-9 M respectively from emission titration. The LOD form absorption titration was found to be 0.6 × 10-7 M for sensor 4 and 0.22 × 10-7 M for sensor 5. In addition, the sensing model is developed as paper based sensor for its practical applicability. The theoretical calculations were performed on Gaussian 03 program by relaxing the structures using Density functional theory.

Fixed-Dose Combination of Dapagliflozin + Sitagliptin + Metformin in Patients with Type 2 Diabetes Poorly Controlled with Metformin: Phase 3, Randomized Comparison with Dual Combinations.

INTRODUCTION: This study compared efficacy and safety of triple drug fixed-dose combination (FDC) of dapagliflozin (DAPA) + sitagliptin (SITA) + metformin (MET) extended release (ER) with SITA + MET sustained release (SR) and DAPA + MET ER in patients with type 2 diabetes poorly controlled with metformin. METHODS: This phase 3, randomized, open-label, active-controlled study included adult patients with glycated hemoglobin (HbA1c) ≥ 8% (64 mmol/mol) and ≤ 11% (97 mmol/mol), randomized in 1:1:1 ratio to receive either FDC of DAPA + SITA + MET ER (10 mg + 100 mg + 1000 mg) tablets once daily (n = 137) or co-administration of SITA + MET SR (100 mg + 1000 mg) tablets once daily (n = 139) or FDC of DAPA + MET ER (10 mg + 1000 mg) tablets once daily (n = 139). Primary endpoint was mean change in HbA1c from baseline to week 16. RESULTS: Mean baseline HbA1c was approximately 9% (75 mmol/mol) in each treatment group. At week 16, adjusted mean reduction in HbA1c from baseline was significantly greater with DAPA + SITA + MET ER (- 1.73% [- 19.0 mmol/mol]) compared to SITA + MET SR (- 1.28% [- 14.1 mmol/mol]; difference of - 0.46% [- 5.1 mmol/mol], p < 0.001) and DAPA + MET ER (- 1.33% [- 14.6 mmol/mol]; difference - 0.4% [4.4 mmol/mol], p < 0.001). Similarly, at week 12, reduction in HbA1c from baseline was significantly greater with DAPA + SITA + MET ER compared to SITA + MET SR (p = 0.0006) and DAPA + MET ER (p = 0.0276). At week 16, DAPA + SITA + MET ER showed significant reduction in postprandial blood glucose compared to DAPA + MET ER (p = 0.0394) and significant reduction in fasting blood glucose with DAPA + SITA + MET ER compared to SITA + MET SR (p = 0.0226). The proportion of patients achieving HbA1c < 7.0% (53 mmol/mol) at week 16 was significantly higher with DAPA + SITA + MET ER (38.5%) versus SITA + MET SR (12.8%) (p < 0.001) and DAPA + MET ER (21.3%) (p = 0.0023). All study medications were well tolerated. CONCLUSION: Triple FDC of DAPA + SITA + MET ER tablets once daily was significantly better in achieving glycemic control versus dual combination once daily in patients with type 2 diabetes poorly controlled with metformin without any significant safety concerns. TRIAL REGISTRATION: CTRI/2021/11/038176, registered on 22 November 2021.

Type 2 diabetes is a progressive disease in which the risks of microvascular and macrovascular complications and mortality are strongly associated with hyperglycemia. Achieving glycemic control remains the main goal of treatment to prevent these complications. Estimates in 2019 showed that 77 million individuals had diabetes in India, which is expected to rise over 134 million by 2045. Considering the progressive nature of the disease, many guidelines recommend use of dual or triple drug therapy based on glycated hemoglobin (HbA1c) level. Use of fixed-dose combination (FDC) helps to improve therapy compliance and can provide optimum therapeutic benefits. Mechanisms of action of dipeptidyl peptidase 4 (DPP4) and sodium­glucose cotransporter 2 (SGLT2) inhibitors are complementary to that of metformin with low risk of hypoglycemia. Studies have shown beneficial effects of adding both DPP4 inhibitors and SGLT2 inhibitors after metformin monotherapy. This phase 3 study was designed to assess efficacy and safety of triple FDC of dapagliflozin + sitagliptin + metformin extended release in comparison with combipack of sitagliptin + metformin sustained release and FDC of dapagliflozin + metformin ER in patients with type 2 diabetes inadequately controlled with metformin monotherapy. The study demonstrated superiority of triple FDC of dapagliflozin + sitagliptin + metformin ER over dual combinations in terms of reduction in HbA1c and percentage of patients achieving target HbA1c at the end of week 16. The current study provides evidence for considering triple FDC of dapagliflozin + sitagliptin + metformin ER as an alternative option with minimal risk of hypoglycemia and weight gain, while considering oral triple-combination therapy for patients to achieve their glycemic target.

Covalent organic frameworks (COFs) and metal-organic frameworks (MOFs) as electrochemical sensors for the efficient detection of pharmaceutical residues.

Pharmaceutical residues are the undecomposed remains from drugs used in the medical and food industries. Due to their potential adverse effects on human health and natural ecosystems, they are of increasing worldwide concern. The acute detection of pharmaceutical residues can give a rapid examination of their quantity and then prevent them from further contamination. Herein, this study summarizes and discusses the most recent porous covalent-organic frameworks (COFs) and metal-organic frameworks (MOFs) for the electrochemical detection of various pharmaceutical residues. The review first introduces a brief overview of drug toxicity and its effects on living organisms. Subsequently, different porous materials and drug detection techniques are discussed with materials' properties and applications. Then the development of COFs and MOFs has been addressed with their structural properties and sensing applications. Further, the stability, reusability, and sustainability of MOFs/COFs are reviewed and discussed. Besides, COFs and MOFs' detection limits, linear ranges, the role of functionalities, and immobilized nanoparticles are analyzed and discussed. Lastly, this review summarized and discussed the MOF@COF composite as sensors, the fabrication strategies to enhance detection potential, and the current challenges in this area.

Metal-organic frameworks (MOFs) based luminescent and electrochemical sensors for food contaminant detection.

With the increasing population, food toxicity has become a prevalent concern due to the growing contaminants of food products. Therefore, the need for new materials for toxicant detection and food quality monitoring will always be in demand. Metal-organic frameworks (MOFs) based on luminescence and electrochemical sensors with tunable porosity and active surface area are promising materials for food contaminants monitoring. This review summarizes and studies the most recent progress on MOF sensors for detecting food contaminants such as pesticides, antibiotics, toxins, biomolecules, and ionic species. First, with the introduction of MOFs, food contaminants and materials for toxicants detection are discussed. Then the insights into the MOFs as emerging materials for sensing applications with luminescent and electrochemical properties, signal changes, and sensing mechanisms are discussed. Next, recent advances in luminescent and electrochemical MOFs food sensors and their sensitivity, selectivity, and capacities for common food toxicants are summarized. Further, the challenges and outlooks are discussed for providing a new pathway for MOF food contaminant detection tools. Overall, a timely source of information on advanced MOF materials provides materials for next-generation food sensors.

Tactile Sensors: Hydroxyl Decorated Silver Metal-Organic Frameworks for Detecting Cr2O72-, MnO4-, Humic Acid, and Fe3+ Ions.

Anionic, acidic, and metal ions are common contaminants in water and cause serious concerns for human and aquatic life. With the goal of rapid detection of analytes, we herein design a new array of ligand 5-(4H-1,2,4-triazol-4-yl)pyridin-3-ol-linked silver coordinated metal-organic frameworks Ag-MOFs as a promising sensor for Cr2O72-, MnO4-, humic acid (HA), and Fe3+ ions down to the micro level. Furthermore, as evidenced by luminescence, excitation-emission matrix (EEM) spectroscopic, and PXRD measurements, designed metal-organic frameworks (MOFs) can be fast, stable, and reusable for analyte detection in water.

Click derived organosilane assembled with nano platform for the detection of Cu2+ ions: Biological evaluation and molecular docking approach.

Metal ions have active roles in biochemical, industrial, and environmental processes. The design and development of new rapid sensing materials with advanced reasonable, compelling, and convenient, techniques are urgent. Here in this work, we design and develop sensor with the facile amalgamation of the pyrene-based organosilane (5) through a click silylation approach silicon composite for selective detection of Cu2+ ions. Physicochemical and keen methods are employed to perceive the resultant hybrid nanoparticles (H-NPs), and these nanocomposites similarly displayed a strong affection for Cu2+ ions. In addition, the identification restrictions while utilizing 5 and H-NP's towards Cu2+ found in this study are far lower than the WHO rules for drinking water. Further, organosilane (5) shows good antibacterial and antioxidant activity. The antibacterial effects of triazole-based organosilane (5), are evaluated with a molecular docking study with Escherichia coli (IJZQ) was conducted. The selected ligand was revealed to have a reasonable docking score with a binding energy of -8.40 kcal mol-1.

Development of piperazine conjoined 1,2,3-triazolyl-γ-propyltriethoxysilanes: Fluorometric detection of Cr3+ ions and computational study.

Chromium is essential for some biochemical processes, and excess is a big concern that shows adverse effects on human health and the environment. Therefore, it is urgent to design new sensors to detect chromium ions rapidly. The present study discusses the synthesis of piperazine conjoined 1,2,3-triazolyl-γ-propyltriethoxysilanes (4a-4b) and development of 4a as fluorescence turn-on sensor for the detection of Cr3+ ions. The mechanistic insights reveal to the restricted CN rotation and inhibited intramolecular charge transfer (ICT) process. In addition, Job's plot and Benesi-Hildebrand plot justify the 1:1 binding affinity with a binding constant of 9.96 × 105 M-1 for [ligand 4a + Cr3+] complex and the limit of detection for Cr3+ ions is observed as 6.06 × 10-8 M. The fluorescence spectral changes, 1H NMR spectra and DFT studies provide evidences for ligand 4a and Cr3+ ions interactions. Further, the reversibility of the ligand 4a from [ligand 4a + Cr3+] complex on the addition of EDTA can be used in the construction of molecular logic gate where Cr3+ and EDTA are considered as inputs and the fluorescence intensity at 398 nm as output. Further, compounds 4a-4b were then evaluated for their antibacterial activity against bacterial strains (Escherichia coliand Staphylococcus aureus), revealing a modest activity. The binding mode of ligand 4a to Staphylococcus aureus (PDB ID - 3U2K) and Escherichia coli (PDB ID - 5Z4O) was investigated using an in-silico molecular docking technique, which revealed that the triazole ring and silanyl group are involved in hydrogen bonding with proteins and may be the cause of the ligand's antibacterial activity. The ligand 4a demonstrated a high affinity for binding within the active sites of proteins with binding energies of -7.97 kcal/mol (3U2K) and -8.68 kcal/mol (5Z4O).

The spectroscopic and computational study of anthracene based chemosensor - Ag+ interactions.

Here in, we demonstrate a selective detection of Ag+ ion by the anthracene-based schiff base sensor AMC. The recognition event among sensor AMC and Ag+ ion was investigated by enhanced absorption band, red-shifted quenched emission spectra, electrochemical studies and DFT computational studies. The presence of Ag+ ion to solution of AMC quenched almost 50 % emission intensity of the ligand band. Data from high-resolution electrospray ionization mass spectrometry (ESI-HRMS), Ag+ titrations, and Job's plot studies all show that Ag+ binds to AMC in a 1:1 stoichiometric ratio.The quantitative parameters of sensor for silver ion are determined as the limit of detection (LOD) 5.95 × 10-7 M, and limit of quantitation (LOQ) 1.98 × 10-8 M in the linear range 3.48-20.31 × 10-6 M with good association affinity of 5.030 × 103 M-1. LMCT phenomenon from insilico studies, is in good agreement with the results obtained from other performed spectroscopic techniques. In addition, this sensor AMC was also successfully applied to real water samples for the identification and measurement of Ag+ ions.

Obtaining Water from Air Using Porous Metal-Organic Frameworks (MOFs).

Water collection from moisture in air, i.e., atmospheric water harvesting, is an urgent future need for society. It can be used for water production everywhere and anytime as an alternative water source in remote areas. However, water harvesting and collection usually relies on desalination, fog, and dewing harvesting, which are energy intensive. In this respect, metal-organic frameworks (MOFs) have broad applicability for water harvesting in water-scarce areas; therefore, the current discussion focuses on this approach. Furthermore, recent progress on MOFs for moisture harvesters is critically discussed. In addition, the design, operation, and water harvesting mechanisms of MOFs are studied. Finally, we discuss critical points for future research for the design of new MOFs as moisture harvesters for use in practical applications. MOF adsorbents offer excellent operating capacity in various temperature and pressure ranges. Rational water harvesters can thus be developed by adjusting structural properties such as the porosity, functionalities, and metal centers, thereby enabling new devices to produce water even in remote areas.

Triazole-Based Cu(I) Cationic Metal-Organic Frameworks with Lewis Basic Pyridine Sites for Selective Detection of Ce3+ Ions.

A highly symmetric bis-triazole-pyridine-based organic ligand, i.e., 3,5-di(4H-1,2,4-triazol-4-yl)pyridine (L), and Cu(II) salts were used to synthesize three cationic Cu(I) metal-organic frameworks (MOFs), namely, {[Cu(L)]·(NO3)·(H2O)}n (1), {[Cu(L)]·(BF4)·0.5H2O}n (2), and {[Cu1.25(L)]·1.25(ClO4)·H2O}n (3). All three MOFs have nonbonded anions situated inside the pore spaces. Both 1 and 2 have a two-dimensional network structure, while 3 has a three-dimensional structure. All three MOFs were characterized using Fourier transform infrared spectroscopy, elemental (C, H, and N) analysis, thermogravimetric analysis, and powder and single-crystal X-ray diffraction. Due to the presence of a Lewis basic pyridine moiety, these MOFs could serve as luminescent probes for the selective detection of Ce3+ ions with excellent efficiency (10-7 M). The synthesis of Cu(I)-based MOFs and their use to detect Ce3+ ions in water via a turn-on fluorescence process have rarely been reported. These MOFs are highly stable in water, are recyclable, and function efficiently at different pH values.